Table of Contents
Advertisement
CHAPTER 6 – MASTER CLEAR & PASSWORD RESET
Master Clear (Option 96)
WARNING:
Master Clear will remove all programmed numbers,
password, and settings
In order to invoke the Master Clear, follow the steps below:
1. Press OPTIONS, numeric key "9", "6", then ENTER.
MASTER CLEAR
2. Enter 8 digits of numeric password (see Administrator Password
Registration in chapter 4).
ENTER ADM PASSWORD
********
* Factory Default Administrator Password - 99999999
3. Press ENTER.
MASTER CLEAR
(1: YES 2: NO) ->
4. If you select 1 for YES, the set will start initializing then the following
screen will appear.
MASTER CLEAR
COMPLETED
If you select 2 for NO, the set will go back to the option menu screen.
1: ONE-TOUCH
3: INITIAL
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the option
menu.
PASSWORD RESET
If you misplaced your password, but you do not wish to invoke a Master
Clear, contact your System Administrator or call Fujitsu Technical Assistance
at 800-228-4736.
2: CALENDAR
(SELECT 1-29)
6
6-1
Advertisement
Table of Contents
