Alarm/Reminder Setting (Cont'd)
NOTES
1. Hour, minute, and date settings can only be two digits long. Any
successive entries after the first two digits move the ones digit to
the tens digit location; this overrides the tens digit.
2. Only certain numbers are accepted for alarm time registration. If
an invalid number is entered from the dialpad, an error message
displays. Allowable numbers for time registration are as follows:
00-12 = hour
00-59 = minute
01-31 = day (depending on the month)
To set the hour:
Action
Dial the numbers from the
dialpad followed by #.
To set the minute:
Action
1. Dial the numbers from the
dialpad followed by #.
2. Press one of the following to
register a.m. or p.m.:
1# a.m.
2# p.m.
Results
Results
172