Mode Change Button; Multi-Line Capability; Non-Prime Line; Parking Position - Fujitsu F9600 User Manual

Mode Change One of the programmable buttons can be
Button assigned as a mode change button. It is used
to access the desired mode of your telephone.
Your extension has three different handling
modes: Voice, Data, and Program. Each of
these modes is accessed and operated
independently by pressing the mode change
button. Your extension defaults to Voice
mode when Data or Program modes are not in
use at your extension.
You can verify the Program mode's status on
FT12D, FT12DS, and FT24DS sets by
pressing the designated program mode
button. Press the data call button to view the
status of the Data mode.
The accompanying mode change lamp
shows the current handling mode of your
extension. The lamp is off (dark) when your
Digital Telephone is in the Voice mode,
steadily on in Data mode, and flashes in the
Program mode.
Multi-Line This feature allows several different lines to be
Capability assigned to any or all buttons on your Digital
Telephone. These lines can be shared among
two or more extensions, or belong only to your
extension. A line can be accessed by manual,
ringing, prime, or idle line preference.

Non-Prime Line

This term refers to other extension numbers
that may be assigned to your telephone, for
example, a co-worker's.

Parking Position

This is an arbitrary system number assigned
by you when parking a call. It can be any
number defined in the system numbering plan.
See your System Administrator for further
information.
194