Fujitsu F9600 User Manual page 126

Message Waiting Display (Cont'd)
Action
2. Dial 1# to enter the
message sending mode.
3. Dial the message number
(1 or 2 digits) and #.
You have three options before you dial the extension number.
• Press # to move to the second page of the message if the
message is longer than 21 characters and you want to read the
latter part of the message. The display shows the 21st character
to the end of the message.
• Press # to move to the next message number if the message is
shorter than 20 characters. You can also move to the next
message when your display shows the second page of a longer
message.
• Press the NEW CALL button to move back to the previous
message number. If the display shows the second page of a
message, it moves back to the first page.
NOTES
1. For semi-free text messages, use your dialpad to enter 0-9 digits
for an * (represents a blank) to fill in the free text portion of the
message.
2. Omit this step if the message is a time stamped callback or a
canned message.
4. Dial up to ten digits on your
dialpad (optional).
Results
The display shows:
SND:ENTER MSG(0-29)#
The display shows:
SND:NXT,SND(#,1#)
WILL CALL AGAIN
The bottom line shows the
message corresponding to the
number you entered.
The display shows the
message with the free space
filled in.
116