Consultation Hold - Release - Fujitsu F9600 User Manual

CONSULTATION HOLD - RELEASE

The use of pre-programmed buttons, RETK (Return to Talk) and REDL
(Return to Dial), allows the user to return to the original caller after
placing a Consultation Hold without initiating a three-way conference.
To return to the original caller after consulting another party,
misdialing, receiving a busy or reorder tone:
Action
1. After a Consultation Hold has
been placed, press the retk
button.
2. Begin talking to the caller.
To return to dialing:
Action
• Press the redl button.
NOTE
This feature cannot be used when a caller's extension is in service
(for example, during an Eight-Way Conference).
Results
Results
You hear dial tone.
70