Programmable Feature Buttons - Fujitsu F9600 User Manual

SPEAKER Button
(Cont'd)
PROGRAMMABLE
FEATURE
BUTTONS
When your Digital Telephone is in Speaker
mode and you are currently connected to an
extension or outside call, your extension
automatically becomes available when the
calling or called party hangs up.
If your Digital Telephone is not equipped with
the Speakerphone capability, the SPEAKER
button is used for handsfree dialing or
handsfree monitoring only. Conversation
cannot occur without the use of the handset.
FT12, FT12D, and FT12DS sets have twelve
programmable feature buttons. The FT24DS
has 24 programmable feature buttons. FT12D,
FT12DS, and FT24DS telephones that are
equipped with the 30-button add-on module
have additional button capabilities.
Each programmable feature button can be
assigned to access a specific extension,
feature, or speed calling code. Programming is
accomplished by assigning a particular feature
code (Table 6) to one of these buttons. A list
of programmable features is shown in Table 2
in the Program Mode section towards the end
of this guide.
Instructions for assigning these features are
found in the Program Mode section. Operation
procedures for the specific features are
provided in the Feature Operation section.
NOTE
Programmable feature button names appear
in bold, lowercase letters in this guide to
distinguish them from basic feature buttons.
9