PROGRAM MODE - OPERATING PROCEDURES
When you want to assign a specific feature to one of your
programmable feature buttons, see Table 3 for a list of features and
corresponding feature codes that can be assigned.
To enter the Program mode and assign feature functions to a
button:
Action
1. Press the program mode
button. Dial the security
code (if applicable).
2. Dial 10#.
3. Select a feature button to be
programmed (the * will move
through all button assignments
after a button has been selected).
4. Dial the two-digit ID code for
the feature you are assigning.
NOTE
If you want to program another feature button, press the
programmable button you want to use and repeat this procedure.
FEATURE BUTTON ASSIGNMENT
VIA PROGRAM MODE
The program mode lamp
goes on. The mode change
lamp lights steadily. The
program mode lamp:
The program mode lamp
stays on.
The selected feature access
lamp flashes slowly.
The program mode lamp
flashes quickly if you make
an invalid entry. The feature
name is displayed on the
telephone.
169
Results
Flashes slowly if valid
security code is entered.
Flashes quickly if invalid
security code is entered.