Call Waiting Tone; Call Warning Tone; Override Tone; Meet-Me Conference Tone - Fujitsu F9600 User Manual

Call Waiting Tone

Call Warning Tone

Override Tone

Meet-Me Conference

Confirmation Tone

Ringing

Distinctive Ringing

This is two short beeps heard during a
conversation to indicate that an incoming
outside call is waiting. A call waiting tone
from extension to extension is one short
beep.
This is two brief bursts of tone indicating
that the most expensive route has been
chosen for your outgoing call.
This is two seconds of the override tone
followed by a continuous lower volume
tone. The override tone is heard by all
parties prior to an override. The lower
volume tone is heard by all parties during
an override.
This is a three second tone heard during
Tone conference calls indicating that additional
parties are entering the conference.
Confirmation tone is heard each time you
press a dialpad button on your telephone
(this feature can be turned off).
A repetitive ringing cycle indicates an
incoming call has been received.
• Internal Call: A repetitive one-
second ringing cycle with a three-
second pause.
• External Call: A repetitive ringing
cycle of two short rings followed by a
two-second pause.
198