Fujitsu F9600 User Manual page 24

Account Code (Cont'd)
Action
3. Dial the account code
registration code ________.
4. Dial the account code.
5. Press the FLASH button, if the
code used is less than the
maximum digit length. If the code
used is the maximum digit length,
no action is required.
NOTES
1. Your System Administrator sets the system configuration for the
maximum number of account code digits allowed.
You are automatically reconnected with the dialed party if the
account code you use is the maximum number of digits.
You must press the FLASH button if the code you use is less
than the maximum digit length for the account code to be
accepted by the system and to reconnect to the dialed party.
2. If this feature is accessed using the account code button, you
can enter the account code without interrupting the conversation.
However, you are required to place a call on hold if you use the
feature code. Conversation is temporarily interrupted.
3. The FT12D, FT12DS, and FT24DS models show ACC CODE
ACCEPTED on the top row of the display panel after an account
code is registered.
Results
The account code lamp goes
on. The following message
displays:
ENTER ACCOUNT CODE
The entry is completed. The
account code lamp goes off.
The following message is
displayed:
ACC CODE ACCEPTED
You return to the call.
14