Fujitsu F9600 User Manual page 110

External Dialer (Cont'd)
To make an outgoing data call with the external dialer:
Action
1. Using a PC database program,
dial the extension number or
outside number, including the
code for an outside line.
2. The called destination answers.
3. Hang up when call is completed.
NOTES
1. If hunt block is encountered on the DTMF receiver or the system
is missing the DTMF receiver card at call origination, you cannot
hear dial tone and the dialing digits are ignored. The call is
abandoned.
2. In the handsfree dialing mode, you can dial the destination
number using the external dialer at first, then go off-hook or press
the SPEAKER button during the ringing to the destination.
However, when using the headset, you must first go off-hook or
press the SPEAKER button before dialing the destination number.
Results
You hear the modem dialing.
Conduct data session.
The connection is
discontinued.
100