FIXED FEATURE
BUTTONS
NEW CALL Button
PARK Button
FLASH Button
CAMP-ON Button
There are eight standard fixed feature buttons
on every Digital Telephone. The following is a
brief description of each of these buttons.
The NEW CALL button disconnects your
current call and gives you new dial tone. This
eliminates the need to hang up the handset to
make a new call. This button is convenient
when you use the headset or speaker. In
Program mode, the NEW CALL button also
assumes other functions.
The PARK button lets you "park" a call or pick
up a parked call from your extension or from a
different extension. Once a call is parked, you
can make or receive other calls on your
extension.
The FLASH button is used to:
•
Enter feature codes that are programmed
into your system.
•
Alternate between calls when using the
Call Waiting - Answer/Alternate/Transfer
feature.
Pressing the button once is the same as
briefly pressing the hookswitch on a standard
single line telephone.
This fixed feature button is used when the
Hookflash Signal to Trunk feature is in effect.
Refer to this feature for more information.
The CAMP-ON button is used whenever you
get a distinctive busy signal when dialing an
outside number. When you press this button,
your outgoing call automatically goes into a
waiting pattern until an outside line is
available.
7