Zero Configuration Internet Access; Configuring Wan Setup - ZyXEL Communications P-861H-G2 User Manual

Table 13 WAN Remote Nodes
LABEL
MBS
Application
Ether
IP

5.6 Zero Configuration Internet Access

Once you turn on and connect the Prestige to a telephone jack, it automatically detects the
Internet connection settings (such as the VCI/VPI numbers and the encapsulation method)
from the ISP and makes the necessary configuration changes. In cases where additional
account information (such as an Internet account user name and password) is required or the
Prestige cannot connect to the ISP, you will be redirected to web screen(s) for information
input or troubleshooting.
Zero configuration for Internet access is disabled when:
• the Prestige is in bridge mode
• you set the Prestige to use a static (fixed) WAN IP address.

5.7 Configuring WAN Setup

To change your Prestige's WAN remote node settings, click WAN and select a node number
in the Remote Node screen. The WAN Setup screen differs by the encapsulation you select.
Chapter 5 WAN Setup
DESCRIPTION
This field displays the Maximum Burst Size (MBS). MBS refers to the maximum
number of cells that can be sent at the peak rate.
This field displays the application type that the remote node uses.
This field displays the Ethernet port(s) that the remote node uses. If there is no
application assigned to an Ethernet port, this field displays Null.
This field displays whether the remote node is configured as a router (IP) or as a
bridge (BDG).
Prestige 861H Series User's Guide
78