Wan Commands; Figure 174 Ip Arp Status; Table 80 Wan Command Summary - ZyXEL Communications P-861H-G2 User Manual

Prestige 861H Series User's Guide

Figure 174 ip arp status

P861H> ip arp status
received 0 badtype 0 bogus addr 0 reqst in 0 replies 0 reqst out 1
cache hit 2 (40%), cache miss 3 (60%)
IP-addr
192.168.1.255
num of arp entries= 1
P861H>

31.4 WAN Commands

These are the commonly used commands that belong to the sys (system) group of commands.

Table 80 WAN Command Summary

MODULE COMMAND SUB-COMMAND
wan hwsar
263
Type
10 Mb Ethernet 0
ARGUMENTS
oam <vpi> <vci>
<Option1>
<Option2>
<Type>
loopback <option>
Time Addr
ff:ff:ff:ff:ff:ff 43
DESCRIPTION
Use this command to perform an oam test where
<Option1>: 0(F4), 1(F5)
<Option2>: 0(Segment-To-
Segmemt), 1(End-To-End)
<Type>: 0(AIS), 1(RDI),
2(LoopBack)
Use this command to perform a loopback test
where <option>: 0(off), 1(on)
Chapter 31 Ethernet, IP and WAN Commands
stat iface
NULL