This command activates the VDSL current port profile.
It sends the current selected profile to the Prestige. It also sends system and port provisioning
data to the Prestige. The Prestige then initiates the profile.
32.6.5 Reset VDSL Profile
Syntax:
This command resets the VDSL profile to be the default settings
Figure 179
P861H> vdsl profile default
Profile reset OK!
P861H>
32.6.6 Band Plans
Each VDSL mode operates in a different frequency band allocation, resulting in different
upstream and downstream speeds. The following table summarizes frequency ranges for each
VDSL mode supported by the Prestige.
VDSL Mode and Frequency Ranges
Table 86
VDSL MODE
BAND PLAN
ANSI/ETSI Plan 998 998-138-8500
998-138-12000 0.138M ~ 3.75M
ETSI Plan 997
997-138-8500
998-137-4400
32.6.7 Show Profile Command
Syntax:
This command displays band plan, UPBO option, channel type, band plan and band modifier.
Maximum upstream and downstream delays are only available in the interleaved/slow channel
mode. An example is shown next.
Chapter 32 VDSL Commands
vdsl profile default
Reset VDSL Profile
FREQ. RANGE (HZ)
Upstream_1
0.138M ~ 3.75M
0.138M ~ 3.00M
0.138M ~ 3.00M
vdsl profile show
Prestige 861H Series User's Guide
Downstream_1
Upstream_1
3.75M ~ 5.20M
5.20M ~ 8.50M
3.75M ~ 5.20M
5.20M ~ 8.50M
3.00M ~ 5.10M
5.10M ~ 7.05M
3.00M ~ 4.40M
Downstream_2
8.50M ~ 12.00M
7.05M ~ 8.50M
270