ZyXEL Communications P-861H-G2 User Manual page 260

Prestige 861H Series User's Guide
IP Command Summary
Table 79
MODULE COMMAND
aliasdis
arp
dhcp
dns
icmp
ifconfig
ping
route
smtp
status
udp
rip
tcp
tftp
259
SUB-COMMAND ARGUMENTS
<0|1>
status <iface>
query
stats clear
disp
status
discovery <iface>
[on|off]
[iface][ipa
ddr]
[broadcast<
addr> |mtu
<value>|dyn
amic]
<hostid>
status [if]
add <dest_addr|
default>[/
<bits>]
<gateway>
[<metric>]
addiface <dest_addr|
default>[/
<bits>]
<gateway>
[<metric>]
addprivate <dest_addr|
default>[/
<bits>]
<gateway>
[<metric>]
drop <host addr>
[/<bits>]
status
status
DESCRIPTION
Disables/enables the alias for the specified
interface.
Displays an interface's IP Address Resolution
Protocol status.
Clears DNS statistics.
Displays DNS statistics.
Displays the ICMP statistics counter.
Sets the ICMP router discovery flag.
This command configures a network interface.
Pings a remote host.
Displays the routing table.
Adds a route.
Adds an entry to the routing table for the
specified interface.
Adds a private route.
Drops a route.
Displays IP statistic counters.
Displays the UDP status.
Displays the TCP statistic counters.
Chapter 31 Ethernet, IP and WAN Commands