Figure 72 Menu 1 General Setup; Table 39 Menu 1 General Setup - ZyXEL Communications P-861H-G2 User Manual

Prestige 861H Series User's Guide

Figure 72 Menu 1 General Setup

Fill in the required fields. Refer to the table shown next for more information about these
fields.

Table 39 Menu 1 General Setup

FIELD
System Name
Location (optional)
Contact Person's
Name (optional)
Domain Name
Edit Dynamic DNS
Route IP
Bridge
141
Menu 1 - General Setup
System Name= P861H
Location=
Contact Person's Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= Yes
ILMI= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Choose a descriptive name for identification purposes. This name can be up to
30 alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
Enter the geographic location (up to 31 characters) of your Prestige.
Enter the name (up to 30 characters) of the person in charge of this Prestige.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP. You can go to menu 24.8 and type "sys
domainname" to see the current domain name used by your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain name
entered by you is given priority over the ISP assigned domain name.
Press the [SPACE BAR] to select Yes or No (default). Select Yes to configure
Menu 1.1 — Configure Dynamic DNS (discussed next).
Set this field to Yes to enable or No to disable IP routing. You must enable IP
routing for Internet access.
Turn on/off bridging for protocols not supported (for example, SNA) or not turned
on in the previous Route IP field.
Select Yes to turn bridging on; select No to turn bridging off.
Note: The Prestige cannot be configured as a bridge and a router
at the same time.
Chapter 14 Menu 1 General Setup