Figure 7 Web Configurator: P-861H Site Map Screen; Table 2 Web Configurator Screens Summary - ZyXEL Communications P-861H-G2 User Manual

Figure 7 Web Configurator: P-861H Site Map Screen
Note: Click the
embedded help.

Table 2 Web Configurator Screens Summary

LINK
Wizard Setup
Advanced Setup
Password
LAN
WAN
NAT
Dynamic DNS
Time and Date
Remote
Management
UPnP
Logs
Maintenance
System Status
DHCP Table
Diagnostic
Chapter 2 Introducing the Web Configurator
icon (located in the top right corner of most screens) to view
SUB-LINK FUNCTION
Connection Setup Use these screens for initial configuration including general
setup, ISP parameters for Internet Access and WAN IP/DNS
Server/MAC address assignment.
Use this screen to change your password.
Use this screen to configure LAN DHCP and TCP/IP settings.
WAN Setup Use this screen to change the Prestige's WAN remote node
settings.
SUA Only Use this screen to configure servers behind the Prestige.
Full Feature Use this screen to configure network address translation
mapping rules.
Use this screen to set up dynamic DNS.
Use this screen to change your Prestige's time and date.
Use this screen to configure through which interface(s) and
from which IP address(es) users can use Telnet/FTP/Web/
SNMP/ICMP to manage the Prestige.
Use this screen to enable UPnP on the Prestige.
View Log Use this screen to view the logs for the categories that you
selected.
This screen contains administrative and system-related
information.
This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
General These screens display information to help you identify problems
with the Prestige general connection.
Prestige 861H Series User's Guide
46