Zero Configuration Internet Access; Configuring Wan Setup; Figure 18 Example Of Traffic Shaping - ZyXEL Communications Network Adapter P-660RU-T V2 User Manual

Figure 18 Example of Traffic Shaping

6.5 Zero Configuration Internet Access

Once you turn on and connect the ZyXEL Device to a telephone jack, it automatically detects
the Internet connection settings (such as the VCI/VPI numbers and the encapsulation method)
from the ISP and makes the necessary configuration changes. In cases where additional
account information (such as an Internet account user name and password) is required or the
ZyXEL Device cannot connect to the ISP, you will be redirected to web screen(s) for
information input or troubleshooting.
Zero configuration for Internet access is disable when
• the ZyXEL Device is in bridge mode
• you set the ZyXEL Device to use a static (fixed) WAN IP address.

6.6 Configuring WAN Setup

To change your ZyXEL Device's WAN remote node settings, click WAN > WAN Setup.
screen differs by the encapsulation you select.
P-660RU-T v2 User's Guide
Chapter 6 WAN Setup
The
61