Changing The System Password; Figure 71 Menu 23.1 Change Password - ZyXEL Communications P-861H-G2 User Manual

Table 38 Main Menu Summary
# MENU TITLE
12 Static Routing Setup
15 NAT Setup
21 Filter Set Configuration
22 SNMP Configuration
23 System Password
24 System Maintenance
25 IP Routing Policy Setup
26 Schedule Setup
99 Exit

13.3 Changing the System Password

Change the Prestige default password by following the steps shown next.
1 Enter 23 in the main menu to display Menu 23 - System Security.
2 Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.
3 Type your existing system password in the Old Password field, for example "
press [ENTER].
Figure 71
4 Type your new system password in the New Password field (up to 30 characters), and
press [ENTER].
5 Re-type your new system password in the Retype to confirm field for confirmation and
press [ENTER].
Note: Note that as you type a password, the screen displays an "
you type.
Chapter 13 Introducing the SMT
DESCRIPTION
Use this menu to set up static routes.
Use this menu to specify inside servers when NAT is enabled.
Use this menu to configure filters.
Use this menu to set up SNMP related parameters.
Use this menu to change your password.
This menu provides system status, diagnostics, software upload,
etc.
Use this menu to configure your IP routing policy.
Use this menu to schedule outgoing calls.
Use this to exit from SMT and return to a blank screen.
Menu 23.1 Change Password
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
Prestige 861H Series User's Guide
1234
" for each character
*
", and
138