ZyXEL Communications P-861H-G2 User Manual page 255

sys Command Summary
Table 75
MODULE COMMAND
stdio
time
trcdisp
trclog
trcpacket
view
wdog
Chapter 30 System Commands
SUB-
ARGUMENTS
COMMAND
schedule
display
schedule hour
[0-23]
schedule
minute [0-59]
schedule
policy
[0:full/
1:hourly/
2:daily/
3:weekly/
4:none]
schedule week
[0:sun/1:mon/
2:tue/3:wed/
4:thu/5:fri/
6:sat]
server
[domainName/
IP]
subject [mail
subject]
sendmail
save
syslog active [0:no/
1:yes]
display
facility
[Local ID(1-
7)]
server
[domainName/
IP]
[minute]
[hour [min
[sec]]]
<filename>
switch [on|off]
Prestige 861H Series User's Guide
DESCRIPTION
Displays the mail schedule.
Sets the hour to send logs.
Sets the minute to send the logs.
Sets the mail schedule policy.
Sets the day of the week for sending weekly
logs.
Sets the domain name or IP address of the
mail server to which to send the logs.
Sets the log e-mail's subject.
Save the log settings from the buffer.
Enables/disables syslog logging.
Displays the syslog settings.
Specifies the file to which the device logs the
syslog messages.
Specifies the domain name or IP address of
the syslog server to which to send the
syslogs.
Sets or displays the management terminal
idle timeout value.
Sets or displays the system time.
Displays the specified text file.
Turns the watchdog firmware protection
feature on or off.
254