Overview Use the included CD or follow the directions in this Quick Start Guide to set up your P-662HW-D. How to Use the Included CD This CD provides multi-media animations that help you set up your P-662HW-D. 1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial.
1 In your browser, go to http://192.168.1.1. 2 Enter the default password user to go directly to the Status screen. If your browser cannot find this screen, check its security settings. See Troubleshooting for details. P-662HW-D Series Quick Start Guide...
If the web page opens correctly, your P-662HW-D is ready to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
Page 5
Troubleshooting for details.. 5 Click Apply to replace the factory default certificate. This creates a unique certificate for your P-662HW-D. If you click Ignore, this prompt will show up every time you login. P-662HW-D Series Quick Start Guide 4 Follow the directions in this screen.
You must enable OTIST on the P-662HW-D and all wireless clients within three minutes in any order. To start OTIST on the P-662HW-D, hold in the RESET button for one to five seconds. Do not hold the RESET button in for too long, as this will reset the P-662HW-D to the factory defaults.
Page 7
A) On a computer in the wireless network, open your browser, and go to http://192.168.1.1. If you see the screen in step of section 3, follow suggestions B) Make sure your P-662HW-D and your computer are using the same settings. Follow the steps in section Viewing Your Product’s Certifications 1 Go to www.zyxel.com.