Wps Button; Reset Button - ZyXEL Communications SCR 50AXE User Manual

Secure cloud-managed router with axe5400 tri-band wifi 6e

Hide thumbs Also See for SCR 50AXE:

Table of Contents

Figure 5 Desk Placement

2.3 WPS Button

Use the WPS button to quickly set up a secure WiFi connection between the Zyxel Device and a WPS-

compatible client device or WiFi extender by adding one device at a time.

To activate WPS:

Press the WPS button until the

Zyxel Device LED table.

Press the WPS button on another WPS-enabled client device within range of the Zyxel Device within 120

seconds. The LED blinks green while the Zyxel Device sets up a WPS connection with the other WiFi client

device.

Once the connection is successfully made, the LED turns off.

Note: When the Zyxel Device fails to set up a WPS connection, the WPS

for 120 seconds and then turns off.

If you need to return the Zyxel Device to its default settings, use the RESET button on the rear panel.

Chapter 2 Hardware

LED blinks green and release it. See

SCR 50AXE Local GUI User's Guide

Section 2.5 on page 14

for the

LED blinks green

Table of Contents