Switching Audio From Your Cisco Spa 525G2 To Your Mobile Phone; Viewing Mobile Phone Battery And Signal Information On Your Cisco Spa 525G2 - Cisco SPA300 Series User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
NOTE
NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Switching Audio from Your Cisco SPA 525G2 to Your Mobile
Phone
You can only switch audio back and forth between the Cisco SPA 525G2 and your
mobile phone if the call is connected using the Cisco SPA 525G2-to-mobile phone
feature. (For example, you cannot switch a call on your Cisco SPA 525G2 that is not
associated with your mobile phone.)
Not all mobile phones support this function. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA 525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also
consult the latest Cisco SPA 525G2 release notes available at cisco.com.
To switch audio from your Cisco SPA 525G2 to your mobile phone, on a connected
call, press .
Handset
To switch audio back to the Cisco SPA 525G2 from your mobile phone, on a
connected call, press
Viewing Mobile Phone Battery and Signal Information on Your
Cisco SPA 525G2
When a mobile phone call is incoming, outgoing, or connected on your Cisco SPA
525G2, the Cisco SPA 525G2 display shows information about your mobile phone.
Not all mobile phones support this function. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA 525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also consult
the latest Cisco SPA 525G2 release notes available at cisco.com.
The display bubble shows the following information:
• Battery indicator: Shows the battery life left on your mobile phone.
• Signal strength: Shows the signal strength for your mobile phone.
• Network (optional): May show the phone network for your mobile phone.
.
Handsfree
3
82