Cisco SPA300 Series User Manual page 79

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
STEP 5
STEP 1
STEP 2
STEP 3
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Enter the PIN (the default is 0000) and press
When paired with your mobile phone, the Cisco SPA 525G2 assigns one of your
line buttons to the mobile phone. Your phone is represented by label and a mobile
phone icon with a flashing lightning bolt icon, as shown near the lower right corner
of the following example.
The Bluetooth phone icon colors show the status of your mobile phone and/or the
Cisco SPA 525G2:
• No icon: Bluetooth is disabled
• Gray icon: Bluetooth is enabled, but the phones are not connected.
• Blue icon: Bluetooth is enabled and the Cisco SPA 525G2 is connected to a
headset.
• Green icon: Bluetooth is enabled and the Cisco SPA 525G2 is connected to
a mobile phone.
To verify the mobile phone configuration:
On the Cisco SPA 525G2, press
Scroll to User Preferences and press
Scroll to Bluetooth Configuration and press
.
Connect
.
.
Select
.
Select
3
79