Switching Audio From Your Cisco Spa 525G2 To Your Mobile; Viewing Mobile Phone Battery And Signal Information On Your Cisco Spa 525G2 - Cisco SPA 525G2 User Manual

Do one of the following:
 Press the 'Answer' softkey to connect to the call
 Press the red flashing line button associated with your mobile phone
 Pick up the Cisco SPA 525G2 handset
 Press Ignore to ignore the call

Switching audio from Your Cisco SPA 525G2 to your mobile

Note: You can only switch audio back and forth between the Cisco SPA 525G2 and your mobile phone if
the call is connected using the Cisco SPA 525G2-to-mobile phone feature. (For example, you
cannot switch a call on your Cisco SPA 525G2 that is not associated with your mobile phone.)
Note: Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones
supported with the Cisco SPA 525G2 that is posted at the Cisco support community at
http://www.cisco.com/go/smallbizsupport, and also consult the latest Cisco SPA 525G2 release
notes available at cisco.com.
 To switch audio from your Cisco SPA 525G2 to your mobile phone, on a connected call, press the'
soft key depicting the two devices with an arrow from the phone to the mobile.
 To switch audio back to the Cisco SPA 525G2 from your mobile phone, on a connected call, press
the soft key depicting the two devices with an arrow from the mobile to the phone.

Viewing mobile phone battery and signal information on your Cisco SPA 525G2

When a mobile phone call is incoming, outgoing, or connected on your Cisco SPA 525G2, the Cisco SPA
525G2 display shows information about your mobile phone.
Note: Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones
supported with the Cisco SPA 525G2 that is posted at the Cisco support community at
http://www.cisco.com/go/smallbizsupport, and also consult the latest Cisco SPA 525G2 release
notes available at cisco.com.
Version 1.5 38 of 47