Cisco SPA300 Series User Manual page 18

Getting Started
Using Softkeys to Handle Calls
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Softkey
Conflx
or Conf Line
Dir or Directory
EditDial
Forward, Clr Fwd
End Call
Exit
Grpick
or Grpickup
Hold
Ignore
Lcr
Miss
New Call
Function
When you have an active call and a held call on your
phone, press this softkey to create a conference for
these calls. If you have multiple calls on hold, you will be
prompted to choose a held call by pressing the line
button. Also see Conf.
To end the conference for everyone, press
hang up. To exit the conference and allow the other
callers to continue the call, press
To place a call from your local directory, press this
softkey. Use the navigation button to open a directory
and select a number. To dial a selected number, press
. To exit without dialing, press
Dial
When using a Redial list or Call History List, press this
softkey to edit the selected number before placing a call.
For example, you may need to edit a misdialed number
or change the dialing prefix. Then press
the call.
Press to forward all incoming calls. Then enter
Forward
an extension or phone number. Press
calls normally.
Press to end the active call.
When viewing a menu on the screen, press this softkey
to return to the home screen.
Press to display a list of ringing calls. Use the navigation
button to select a call, and then press
it. Also see Pickup.
During a call, press this softkey to place the call on hold.
When the phone is ringing, press this softkey to divert
the call to the configured Call Forward No Answer
Number. Also see Dnd, -Dnd, Clr
Returns the last called that was received on this phone.
Displays the Missed Calls list. Use the navigation button
to select a call, and then press
After placing a call on hold, press this softkey to place a
new call.
1
or
End Call
.
Join
twice.
to place
Dial
to receive
Clr Fwd
to answer
Dial
Dnd.
.
Dial
18