Cisco SPA300 Series User Manual page 28

Using Basic Phone Functions
Choosing an Audio Device
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Task
Choosing your preferred
audio device
Choosing a Bluetooth
headset for a call
Instructions
Not available on Cisco SPA301, Cisco SPA501G,
or Cisco SPA525G/G2
If you press a line button or begin dialing without
lifting the handset, your Preferred Audio Device is
used. By default, the speaker is preferred.
Alternatively, you can choose the headset.
1. Press .
2. Select Preferences.
3. Select Preferred Audio Device, and then press
.
Edit
4. Press to view and select a device.
Option
5. Press , and then press
OK
Available only on Cisco SPA525G/G2
1. Make sure your headset is powered on.
2. Press on your phone (or, if supported, press
the Answer button on your Bluetooth headset
twice).
3. Dial the number to place a call.
4. Press the Answer button on your Bluetooth
headset to answer a ringing call. See the user
documentation for your Bluetooth headset for
more information.
For more options with Cisco SPA525G2, see
the Cisco SPA 525G2 With Your Bluetooth-
Enabled Mobile Phone, page
2
.
Save
Using
76.
28