Receiving Mobile Phone Calls Using The Cisco Spa 525G2 - Cisco SPA300 Series User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
STEP 1
STEP 2
NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Press the line button associated with your mobile phone (the line button is marked
with a mobile phone icon with a flashing lightning bolt).
Do one of the following:
• Enter a number to dial and press
• Press
Directory
and press
Dial
• Scroll to select a recently called number and press
If you usually enter a digit before dialing (such as
remember that this call is made through your mobile phone. You should follow the
usual practice for making calls on your mobile phone (for example, you probably do
not dial a digit to reach an outside line on your mobile phone).
The outgoing call appears on both your Cisco SPA 525G2 and your mobile phone
screen. The Cisco SPA 525G2 displays an off-hook icon next to the mobile phone
name or number.
After the call is connected, the icon next to the mobile phone shows that the call is
established. The audio goes through the Cisco SPA 525G2, although the mobile
phone screen also shows a connected call.

Receiving Mobile Phone Calls Using the Cisco SPA 525G2

If your mobile phone is paired with the Cisco SPA 525G2, an incoming call to your
mobile phone is also shown on the Cisco SPA 525G2.
Use one of the following methods:
• Press
Answer
• Press the flashing line button associated with your mobile phone.
• Lift the handset.
• Press
Ignore
and select the Personal Address book. Choose a number
.
to connect to the call.
to ignore the call.
.
Dial
Select
to reach an outside line),
9
3
.
81