Cisco SPA300 Series User Manual page 72

Using Advanced Phone Features
Using Star Codes
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Enter: To do this:
*70 Disable call waiting for a
single call.
*71 Enable call waiting for a
single call. If a new call is
received during an active
call, a tone plays.
*72 Enable Call Forward All.
Forwards all incoming
calls to the specified
number.
*73 Disable Call Forward All.
*77 Enable anonymous call
blocking. Anonymous
calls will be ignored.
*78 Enable Do Not Disturb.
*79 Disable Do Not Disturb.
*86 Disable Call Back.
*87 Disable anonymous call
blocking.
Notes
When entering the star code, also enter the
phone number that you want to call. Then
press . Call waiting is disabled for
Dial
the duration of the call.
When entering the star code, also enter the
phone number that you want to call. Then
press . This feature is active for the
Dial
duration of the call.
You will be prompted on the screen (or with
a tone on Cisco SPA301 and Cisco
SPA501G). Enter an extension or a phone
number. For an outbound call, include the
dialing prefix required to get an outside line,
as well as any long-distance prefix required
for your phone service. (No dialing prefix is
required on a shared line.)
This feature is active until you disable it.
This feature is active until you disable it.
This feature is active until you disable it.
3
72