Connecting A Cisco Spa525 Model Phone To The Wireless Voice Network - Cisco SPA300 Series User Manual
Spa300 series, spa500 series;
Hide thumbs
Also See for SPA300 Series:
- Quick start manual (3 pages) ,
- Quick reference card (2 pages) ,
- Manual (2 pages)
Table of Contents
Advertisement
Using Advanced Phone Features
Connecting a Cisco SPA525 Model Phone to the Wireless Voice Network
Connecting a Cisco SPA525 Model Phone to the Wireless
Voice Network
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
NOTE
NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
If the phone administrator enabled a wireless voice network, you can use Cisco
SPA525G/G2 wirelessly. Follow this procedure to verify that your phone is
connected to the wireless network. If you have questions, consult your phone
administrator.
If an Ethernet cable is connected to the phone, remove it and wait for the phone to
reboot. If an Ethernet connection is present on the phone, it is used instead of the
Wi-Fi connection.
Press
on your phone.
Scroll to Network Configuration and press
In the Wi-Fi field, confirm that there is check mark to indicate that Wi-Fi is On. If the
check mark does not appear, press the left-arrow or right-arrow navigation button
to enter a check mark in the field.
Select Wireless Profile. The display should show that the phone is connected the
wireless voice network.
If the connection is not shown, complete the following tasks to connect to the
wireless network by using Wi-Fi Protected Setup. Consult your phone
administrator if you need assistance.
a. Press the down-arrow navigation button to move the cursor to Wi-Fi
Configuration.
b. Press the right-arrow navigation button to open the Wi-Fi Configuration menu.
c. Select Wi-Fi Protected Setup. The Select the WPS Mode window appears.
d. Select Push Button Configuration. The Push Button Configuration instructions
appear.
e. On the front panel of the Unified Communications System, press the Wi-Fi
Protected Setup (WPS) button.
f.
On the phone, press
AP. The phone may reboot before the Wi-Fi connection is working.
The PC port is not supported in wireless operation. A PC can be connected to the
port only when an Ethernet cable is connected to the phone.
Select
. The phone displays a message: Connecting to
Select
.
3
75
Advertisement
Table of Contents
