Table of Contents
Advertisement
VERSA•TOUCH2™ CONTROL INSTALLATION
VERSA•TOUCH2™ HARDWARE (not to scale)
W-73
W-73
Control Holder
Control
SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/switch.
WARNING: To reduce the risk of fi re or electric shock, do not use this fan with any solid state speed control device.
Step 16. Follow instructions for the type of transmitter control bracket you will be using.
Inner
Mounting
holes
Control
Bracket
Standard Light Switch
Step A. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step B. Orient the control bracket as shown and line up the
two inner mounting holes with those on the switch.
Step C. Insert and tighten the screws using the provided
screwdriver.
Wall Installation
Step A. L ocate a 2x4
wall stud in a convenient
location.
Step B. Orient the control
bracket as shown over the
2x4 stud.
Step C. Insert the 1" wood
screws in either the inner or
outer mounting holes and
tighten using the provided
screwdriver.
10
Drywall Anchor
12v Battery
CONTROL BRACKET INSTALLATION
CAUTION! Do not use with wall dimmer.
Use only the control provided with this fan.
Standard
Toggle
Switch
Switch
Cover
Plate
Wood
Screw
6-32 (2)
1" (2)
Outer
Mounting
Holes
Control
Bracket
Rocker Light Switch
Step A. Break off the two tabs by pushing outward.
Step B. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step C. Orient the control bracket as shown and line up
the two inner mounting holes with those on the switch.
Step D. Insert and tighten the screws using the provided
screwdriver.
NOTE: Th e wall anchors and 6-32 x 1" screws may
be used in situations where mounting to a stud is not
possible. Use the inner mounting holes. After securing
the anchor, discard the anchor's pointed screws and use
the 6-32 decor ovalhead screws supplied.
Anchor
Panhead
Screw
Wood
Screw 1"
Screw
Screw
6-32 X
3
/
"
6-32 X 1"
8
(2)
(2)
Rocker
Light
Switch
Switch
Cover
Plate
Drywall Anchor
Decor Ovalhead Screw
6-32 X 1"
Advertisement
Table of Contents
