Transferring Calls; Forwarding Calls - Polycom IP 331 User Manual

T C
RANSFERRING ALLS
To transfer an ongoing call:
1. during a call, press Trans, the active call is placed on hold
2. place a call to the party to whom you want to transfer the call
3. press
4. hold until your call is answered by the second party, then press the
5. you can now replace the handset
blind transfer (the transfer is unannounced):
1. during a call, press Trans. the active call is placed on hold
2. press Blind
3. enter the number of the party to whom you want to transfer the call
4. press
5. you can now replace the handset
F C
ORWARDING ALLS
You can redirect ALL incoming calls to another phone number
To enable call forwarding:
1. from the idle screen, press
2. enter a number to forward calls to
3. press
Enter
A voice message confirms that call forwarding is enabled
To disable call forwarding:
1. from the idle screen, press
2. dial "0"
3. press Enter
A voice message confirms that call forwarding is disabled
When call forwarding has been completed successfully, a call forward icon
number to whom the call has been forwarded to, will appear on your phone display (the icon may
appear with up to 30 seconds delay)
Go to Table of Content
Forward
Forward
again
Trans
→
, followed by the
6 / 10