Removal Procedures; Left Side Removals; Left Cover Removal - Lexmark MS410 Series Service Manual

Removal procedures

Keep the following tips in mind as you replace parts:
•
Some removal procedures require removing cable ties. You must replace cable ties during reassembly to avoid
pinching wires, obstructing the paper path, or restricting mechanical movement.
• Remove the toner cartridge, imaging unit, and media tray before removing other printer parts. The imaging unit
should be carefully set on a clean, smooth, and flat surface. It should also be protected from light while out of the
device.
•
Disconnect all external cables from the printer to prevent possible damage during service.
•
Unless otherwise stated, reinstall the parts in reverse order of removal.
• When reinstalling a part held with several screws, start all screws before the final tightening.

Left side removals

Left cover removal

1
Position the printer so that it sits on its right side.
2
Open the front door.
3
Remove the two screws (A) securing the left cover.
4
Release the latches, and swing the left cover upward to remove.
A
Repair information
146
4514-420, -430