Table of Contents
Advertisement
: Use the descriptions in the following table to configure each output device:
Steps
Table 2-6: Configuration > Doors > Output Tab Field Descriptions
Setting
Name
Pulse Time
Time Zones
Latching
Interlock
Keep On
Snow Day
NetAXS™ Access Control Unit User's Guide, Document 800-00233, Revision A
Description
Enter a unique name to identify the device.
Specifies the duration for which the device will assume
abnormal status. For example, it specifies how long a horn
will blow or a door strike will remain released. Enter the
desired number of hours (1024 maximum), minutes (60
maximum), and seconds (60 maximum). The sum of all
three units comprises the pulse time. Note that you can
express seconds in tenths of a second.
Specifies two schedules:
•
– sets the period during which the output
Energized
switches are automatically energized.
•
– sets the period during which the
Disable Interlock
interlock, or a programmed interaction between
selected inputs and outputs will be disabled.
When selected, this locks a relay (either Normally Open or
Normally Closed) to lock into place until it is reset either
manually or by a signal
Enables you to disable the interlock, or programmed
interaction between this output device and an input device.
Keeps the selected input shunted or the selected output (or
output group) energized for the duration of its time zone.
Requires, like the First Card Rule, a valid card read before
the time zone (period in which doors are unlocked) can take
effect. Unlike the First Card Rule, however, the user can
swipe the card a second time to return the doors to a locked
state. For example, the principal of a school opens the
school with a valid card read, and then closes the school
with another card swipe when a storm arises. The time zone
does not become active at its normal time.
Note that both Snow Day and First Card Rule cannot be
enabled at the same time.
Configuring via the Web Server
Configuring the Doors
2-29
Hide quick links:
Advertisement
Table of Contents
