Honeywell NetAXS User Manual page 40

Configuring via the Web Server
Configuring the Doors
The Reader tab enables you to:
• Define the time zone during which the reader will be disabled. When the
• Define the time zone during which the reader will be in lockdown mode (see
• Define the reader's access mode (the combination of card and/or PIN entry
• Enable the Card Only, PIN Only, Card and PIN, and Card or PIN access modes
• Configure the anti-passback feature. When enabled, the anti-passback feature
• Specify the data format the reader must use to read the card data.
• Reconfigure a selected format's data layout.
2-22 www.honeywell.com
reader is disabled, neither exit nor entry by Card and PIN mode or Card or PIN
mode is allowed. Also, free egress is not allowed.
Time Zones Tab, page 17
reader is in lockdown mode, entry is prevented but egress is still allowed.
required by the reader). Note that the access mode defined here for the door
can be overridden by a card assigned with a VIP card type (see
Cards" on page 36 for information about assigning a VIP card type).
with either the Supervisor or Escort rule:
– Supervisor Rule: When the supervisor presents his card during the specified
time zone just once, he gains access but does not enable access for
non-supervisory personnel.
– Escort Rule: This rule requires a supervisor escort for a non-supervisor.
prevents an entrant to an area from passing his card back to another potential
entrant. Note that anti-passback must first be enabled at the
screen (see
System > General
for details about setting time zones). When the
General Tab, page 3).
"Adding New
Configuration >