Honeywell NetAXS User Manual page 45

6. If you want to change an existing card format's data layout, double-click the
NetAXS™ Access Control Unit User's Guide, Document 800-00233, Revision A
Table 2-5: Configuration > Doors > Reader > Card Format Fields (continued)
Setting Description
Site Code D Lists where on the card the Site Code A is listed. Consult
the card manufacturer for detail on the card detail.
Start Bit
begins.
Num Bits
including the start bit, that comprise the Site Code.
Most card formats require only Site Code A.
Issue Code Lists where on the card the Issue Code A is listed.
Start Bit
begins.
Num Bits
including the start bit, that comprise the Issue Code.
Most cards do not contain an Issue Code.
format's name on the list of existing formats to display the Card Format Data
Layout screen. Use the descriptions in the table above to edit the layout's
fields. Then, click
Update
save with a different format name) to save the edited format. To return to the
default settings for the card format, click
.
Delete
Configuring via the Web Server
– first bit in the card where the card's Site Code
– Number of bits to the right of the start bit,
– first bit in the card where the card's Issue Code
– Number of bits to the right of the start bit,
(to save in the format's current name) or
. To delete the card format, click
Reset
Configuring the Doors
(to
Save as
2-27