Monitoring Outputs - Honeywell NetAXS User Manual

Monitoring NetAXS™ Status

Monitoring Outputs

4.5 Monitoring Outputs

An output is an output device that changes its normal state when it is energized, pulsed, or time-zone
controlled. For example, a successful card read at a reader pulses a door lock. The lock changes its
normally locked state to an unlocked state and the cardholder opens the door.
A NetAXS™ panel supports one output for each of its four doors. The panel also supports four
additional outputs for auxiliary devices and 64 downstream outputs. Outputs can be configured singly
as discrete outputs (see
group of outputs
The Pulse and Restore to Time Zone buttons will be greyed out if no outputs are attached.
Note:
Click
Status > Outputs
Figure 4-6: Status > Outputs > Discrete Tab
Figure 4-7: Status > Outputs > Groups Tab
Click
Status > Outputs > Groups
4-10 www.honeywell.com
"Output Tab" on page 28 and
("Groups Tab" on page 49).
to display the Discrete tab of the Output Status screen:
to display the Groups tab of the Output Status screen:
"Outputs Tab" on page 46) or collectively as a