Honeywell NetAXS User Manual page 97

The Output Status tab enables you to:
• View the current status of each output in the Discrete tab (Energized or
• View the current status of each output group in the Groups tab.
• Energize or de-energize any output or group indefinitely.
• Pulse any output. This energizes the output or group for a configured period of
• Restore the output to its configured time zone. A time zone is a specified time
:
Steps
1. To energize an output or group of outputs for an indefinite period of time, click
2. To Pulse an output or group of outputs for the configured period of time, click
3. To re-set the output behavior according to its configured time zone, click the
NetAXS™ Access Control Unit User's Guide, Document 800-00233, Revision A
De-energized).
time (see "Output Tab" on page 28).
period during which the output will be energized. (see
Management" on page 15).
the button to display a prompt. Click
De-energized
to "Energized."
To de-energize an output or group of outputs for an indefinite period of time, click
the button to display a prompt. Click
Energized
"De-energized."
the button to display a prompt. Click
Pulse
Pulse button will be greyed out if no output is attached.
button to display a prompt. Click
Restore to Time Zone
zone. Note that the Restore to Time Zone button will be greyed out if no output
is attached.
Monitoring NetAXS™ Status
Monitoring Outputs
"Configuring Time
to complete the change
OK
to complete the change to
OK
to start the pulse. Note that the
OK
to restore the time
OK
4-11