Table 2-3: Configuration > Time Management Tab Field Descriptions - Honeywell NetAXS User Manual

Configuring via the Web Server
Configuring Time Management
: Use the descriptions in the following table to configure the time settings:
Steps
Table 2-3: Configuration > Time Management Tab Field Descriptions
Setting
Current loop time
Format
New Date
New Time
Geographic Time
Zone
Time Server
2-16 www.honeywell.com
Description
Displays by default the current time setting.
– The 24-hour day is divided into two 12-hour
12 hour
halves, a.m. and p.m.; each half is numbered 1-12.
– The hours in the 24-hour day are numbered
24 hour
consecutively 0-23.
Specifies a new date to be the current date.
Specifies a new time to be the current time.
Select the geographic time zone in which the panel will
operate.
Enter the IP address of the machine whose time is used as
the standard for all panels.
Enabled – Select to enable the specified machine to be the
active time server.
Update Interval – Specifies the interval of time between
each automated synchronization.
Force Timesync – Synchronizes the time between the time
server and panel(s) manually.