Configuring The System; General Tab; Table 2-1: Configuration > System > General Tab Fields; Configuring Via The Web Server - Honeywell NetAXS User Manual

2.2 Configuring the System

Click
Configuration > System
screen:

2.2.1 General Tab

The General Tab enables you to:
• Set the general configuration settings.
• Reset the panel.
: Use the descriptions in the following table to configure the general settings, and click
Steps
Changes
Table 2-1: Configuration > System > General Tab Fields
Parameter
Name
Address
Type
Boot Time
NetAXS™ Access Control Unit User's Guide, Document 800-00233, Revision A
in the NetAXS™ menu to display the System Configuration (General)
:
Description
Unique name that identifies the panel.
Displays the address set by the panel's DIP switches.
Displays "NetAXS" as the panel type.
Displays the time that power was applied to the
NetAXS™ panel.

Configuring via the Web Server

Configuring the System

Submit
2-3