Honeywell NetAXS User Manual page 56

Configuring via the Web Server
Maintaining Cards
Table 2-8: Cards > Add Cards Field Descriptions (continued)
Field
Expiration Date
Use Limits
Note 1
Note 2
Access Level
2-38 www.honeywell.com
Description
Specifies the date that a visitor's card is de-activated. A visitor's
card is one that is configured in Configuration > System >
General Tab (see "General
field set to
Visitor Cards (limited days)
active only when the Temp box is checked in the Card Type
field.
Specifies the number of times or the number of days a card may
be read at a card reader to which it has valid access. A panel is
configured with one of three card use settings at Configuration >
System > General Tab (see
Visitor Cards (limited days)
can be used only a limited number of days. The specified period
begins at the time the card is created.
– Specifies a card that can be used only a
Limited-Use Cards
limited number of times.
Neither – Specifies all cards other than visitor or limited-use
cards.
If the panel is configured with Visitor Cards (limited days), the
Use Limits field accepts a number of days. If the panel is
configured with Limited-Use Cards, the Use Limits field accepts
a number of uses.
Provides a user-defined field. See
3 for information about how this field is defined for the Add
New Card template.
Provides a user-defined field. See
3 for information about how this field is defined for the Add
New Card template.
Specifies the time zone, or time schedule, during which the card
holder can be granted access at a specific door.
Tab" on page 3) with the Use Limits
. Note that this field is
"General Tab" on page 3):
– Specifies a card for a visitor that
Configuring the System,
Configuring the System,
page
page