Set Date And Time - Canon Color imageRUNNER C1030 Starter Manual

Set Date and Time
Before using the machine, you MUST set the current date and time. The date and time set are used as a standard
for timer settings functions.
Information About the Keys
●
Press [ ▼ ] [ ▲ ] [ ◀ ] [ ▶ ] to move the cursor position.
‒
Use (Scroll Wheel) to move the cursor position.
‒
Press the Left/Right Any key to select the alternative key at the bottom of the display.
‒
Press – (numeric keys) to enter numbers.
‒
Press [OK] to set the entry or to proceed to the next screen.
‒
Press [Back] to return to the previous screen.
‒
Press (Clear) to delete the entire entry.
‒
The display returns to the Standby mode:
●
The machine may enter the Standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. The default setting is 2 minutes. To
change the settings, see "Introduction of the Machine" in the e-Manual.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup. Press
To change the settings, see "Introduction of the Machine" in the e-Manual.
1
Press (Main Menu).
2
Press the right Any key to select <Additional
Func.>.
(Power) to turn the display back ON and continue the setup. The default setting is 15 minutes.
3
Use [ ▼ ], [ ▲ ] or
<Timer Settings>, then press [OK].
2 Set Up the Machine
(Scroll Wheel) to select
5