Set Ip Address Automatically - Canon Color imageRUNNER C1030 Starter Manual

11
Use – (numeric keys) to enter the subnet
mask then press [OK].
Set IP Address Automatically
This is the setting for obtaining an IP address automatically. If you do not need to configure this setting
manually, follow the procedure below.
(In case the machine cannot obtain the IP address automatically, you can specify the IP address, subnet
mask, and gateway address. If you do not know them, skip each entry by pressing [OK].)
(Main Menu) → <Additional Func.> → <System Management Set.>* → <Network Settings> →
Press
<Done> → <TCP/IP Settings> → <IPv4 Settings> → <IP Address Settings> → <Obtain Automatically> →
<DHCP> → Enter the IP address → Enter the subnet mask → Enter the gateway address → <Done> →
(Main Menu) → Turn off the main power → Restart the machine.
* If the screen appears prompting you to enter the System Manager ID and System Password, enter the
System Manager ID and System Password using
details, see "Security, " in the e-Manual.
For more information on this setting, see "Network Settings, " in the e-Manual.
12
Use – (numeric keys) to enter the
gateway address, then press [OK].
13
Press
Main Menu screen.
14
Press the main power switch on the right side
of the machine to " " side, wait at least 10
seconds, and then press the main power
switch to "I" side.
– (numeric keys), then press
2 Set Up the Machine
(Main Menu) to return to the
(Log In/Out). For
21