Set Date And Time - Canon imageCLASS MF4350D User Manual

3 Make Fax Settings

Set Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
Entering Information
●
Use – [numeric keys] to enter numbers.
‒
Press [ ] or [ ] to move the cursor position.
‒
Press [OK] to confirm the entry.
‒
Press [Clear] to delete entire entry.
‒
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
1
Press [Menu].
2
Press [ ] or [ ] to select <8 TIMER
SETTINGS>, then press [OK].
M E N U
8 T I M E R
3
Confirm that <1 DATE&TIME SETTING> is
displayed, then press [OK].
T I M E R S E T T I N G S
1 D A T E & T I M E
16
S E T T I N G S
S E T T I N G
4
Use – [numeric keys] to enter the date
(month/day/year) and time (in 24-hour format),
then press [OK].
Ex.
D A T E & T I M E
1 5 : 5 0
If you accidentally enter an incorrect number, press [
[ ] to move the cursor to the number that needs
correction and overwrite it.
5
Press [Stop] to return to the standby mode.
–
You can select one of the following three date formats in
<2 DATE TYPE SELECT>.
<MM/DD/YYYY>
<DD/MM YYYY>
<YYYY MM/DD>
–
By default, <4 DAYLIGHT SV. TIME> in the <8 TIMER
SETTINGS> menu is set to <OFF>.
–
If you want to set <4 DAYLIGHT SV. TIME> in the <8 TIMER
SETTINGS> menu to <ON>, see "Introduction of the
Machine, " in the e-Manual.
S E T T I N G
0 7 3 1 ' 0 8
] or