Set The Date And Time - Canon imageCLASS MF6595 Starter Manual

Set the Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
Entering Information
●
Numeric keys: Enters numbers.
‒
[ ] or [ ]: Moves the cursor position.
‒
[OK]: Confirms the entry.
‒
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <6. TIMER
SETTINGS>, then press [OK].
3
Press [ ] or [ ] to select <1. DATE&TIME
SETTING>, then press [OK].
4
Use the numeric keys to enter the date (month/
day/year) and time (in 24-hour/military time
format), then press [OK].
Ex.
D A T E & T I M E S E T T I N G
´ 0 7 1 1 : 1 9
1 2 / 3 1 /
If you accidently enter an incorrect number, press [
[ ] to move the cursor to the number that needs
correcting and overwrite it.
5
Press [Stop] to return to the standby mode.
–
You can select one of the following three date formats in
<2. DATE TYPE SELECT>.
–
<MM/DD/YYYY>
–
<DD/MM YYYY>
–
<YYYY MM/DD>
–
By default, <5. DAYLIGHT SV. TIME> in the <6. TIMER
SETTINGS> menu is set to <OFF>.
If you want to set <5. DAYLIGHT SV. TIME> in the <6.
TIMER SETTINGS> menu to <ON>, see Chapter 1, "Before
Using the Machine, " in the Basic Operation Guide.
The LCD display turned off:
●
The machine may enter the sleep mode while you are
setting up the machine. Press [POWER] to turn the
machine back on and continue the setup.
] or
Set Up the Machine Set Up the Machine
9