Canon Color imageRUNNER C1030 Starter Manual page 42

3 Set Up Computers and Software
3
Make sure that the boxes next to the
UFR II Printer Driver, FAX Driver (Color
imageRUNNER C1030iF or C1030
with the optional Super G3 FAX Board
attached) and Manuals are checked.
–
Color Network ScanGear is an
application software that can only
be used in the network. If the
machine is connected using a USB
connection, uncheck the box next
to Color Network ScanGear, as it is
unnecessary.
–
If you want to install only the UFR II
Driver, select only the UFR II Printer
Driver in this step, then proceed to
the next step. For more information
refer to the Printer Driver
Installation Guide (located on the
UFRII LT/FAX User Software CD-
ROM).
–
If you want to install only the fax
driver, select only the FAX Driver in
this step, then proceed to step 13.
For more information refer to the
Fax Driver Installation Guide
(located on the UFRII LT/FAX User
Software CD-ROM).
–
If the amount of free disk space is
insufficient to install the software,
an error message is displayed.
Make sure there is sufficient disk
space, and then try installing the
software again.
40
4
5
6
7
8
9
10
If the dialog box shown below
appears, press [Retry] to continue the
installation.