2 Set Up the Machine
Check IP Address Setting
To make sure this machine is communicating with the network properly, follow the procedure below.
1
Press
(Main Menu).
2
Press the right Any key to select <Additional
Func.>.
3
Use [ ▼ ], [ ▲ ] or
(Scroll Wheel) to select
<System Management Set.>, then press [OK].
If the screen appears prompting you to enter the System
Manager ID and System Password, enter the System
Manager ID and System Password using
keys), then press
(Log In/Out). For details, see "Security, "
in the e-Manual.
22
4
5
–
(numeric
Use [ ▼ ], [ ▲ ] or
(Scroll Wheel) to select
<Network Settings>, then press [OK].
Press the right Any key to select <Done>.
Change to the IP address, subnet mask, and gateway
address settings will be effective after restarting the
machine.