Canon Color imageRUNNER C1030 Starter Manual page 40

3 Set Up Computers and Software
3
Click the scanner to be used (select this machine, in this case) in the list → click [Select].
Information for the selected scanner appears under [Selected Scanner].
–
Only scanners on the same subnet (network with the same network ID) as your computer are displayed in the list.
–
After selecting the scanner, you can click [Test Connection] to check that the selected scanner can be used.
–
You can also specify the machine for scanning by clicking [Address]. For details, see "Scanning Documents from a Networked
Computer" in the e-Manual.
4
Click [Exit].
The ScanGear Tool is closed.
38