Canon Color imageRUNNER C1030 Starter Manual page 22

2 Set Up the Machine
5
Press the right Any key to select <Done>.
Change to the IP address, subnet mask, and gateway
address settings will be effective after restarting the
machine.
6
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select <TCP/
IP Settings>, then press [OK].
7
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select <IPv4
Settings>, then press [OK].
20
For instructions on the settings for IPv6, see "Network
Settings, " in the e-Manual.
8
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select <IP
Address Settings>, then press [OK].
9
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<Manual Settings>, then press [OK].
10
Use – (numeric keys) to enter the IP
address, then press [OK].