Connect The Power Cord; Set The Date And Time - Canon ImageCLASS MF3240 Series Starter Manual

Connect the Power Cord

1
Connect the power cord into the rear socket and the wall
outlet.
NOTE
There is no power switch.
What if...
● <CLOSE COVER/FRONT COVER> is displayed:
Make sure that the front cover is closed properly.
(See "Install Toner Cartridge," on p. 5.)
● <TONER IS NOT SET/INSERT THE TONER> is displayed:
Make sure that the toner cartridge is installed properly.
(See "Install Toner Cartridge," on p. 5.)
● <LOAD PAPER> is displayed:
Make sure that paper is loaded in the machine. (See "Set Up the Paper Cassette and Load Paper," on p. 7.)
13
2
Ex.
1 0 0 % L T R
T E X T 1
The machine enters standby mode.

Set the Date and Time

[ ] [ ] [Additional [Stop/Reset]
Functions]
[FAX] [OK] [Clear] Numeric Keys
1 2
Press [Additional Use [
Functions]. select <3 TIMER
SETTINGS>, then press
[OK].
4 5
Use the numeric keys to Press [Stop/Reset] to
enter the time (in 24-hour return to standby mode.
format) and date (year/
month/day), then press
[OK].
Ex.
D A T E & T I M E S E T T I N G
1 1 : 1 9 1 2 3 1 ´ 0 5
● Entering Information
– Numeric keys: Enters letters and
numbers.
– [ ] or [ ]: Move the cursor
position.
– [Clear]: Deletes the character at
the cursor position, or the entire
entry if held for more than one
second.
3
] or [ ] to Use [ ] or [ ] to
select <2 DATE&TIME
SETTING>, then press
[OK].
14